Personalized Funny Bar Sign - The Alibi Man Cave and Home Bar Decor
Customizations Total: $0.00
What Happens Next? Personalized orders receive a proof within 48–60 business hours; production begins after approval. Non-personalized orders go directly into production.
Questions? Call us: 616.897.2070
Made to Order in USA & Canada
Production: 7–10 days | Shipping: 3–5 days
Description
The Alibi: A Personalized Funny Bar Sign for the Man Cave and Home Bar
Your name across the top and your own line underneath. Printed on 3mm aluminum composite or high gloss acrylic, in eleven sizes from 16 by 8 inches up to 90 by 45 inches, with a clear acrylic edge built to take an LED strip if you want it lit.
TODD'S ALIBI. Everyone needs a good one. Put your own name on it, hang it over the bar, and it does the talking for you. That is the entire point of a funny bar sign.
A Funny Bar Sign With Your Name On It
The top panel is yours. A first name, a last name, a nickname, or whatever the people who drink in your bar already call the place. Type it exactly the way you want it printed, apostrophe and all, and we set it in the arched header above the word ALIBI. TODD'S in the photographs is just our example. Yours goes in the same spot, in the same lettering.
The line underneath is yours too. Leave it alone and it reads EVERYONE NEEDS A GOOD ONE, which is the joke the sign was built around. Or write your own and we will set that instead. Est. 1998. Open til the ice runs out. Don't tell the wife. Whatever belongs in your bar.
Most funny bar signs shout. This one is dry. It reads as a proper bar sign first and the punchline arrives a second later, which is why it works over a real bar instead of looking like a novelty.
What It Looks Like
Tall beveled capitals with a warm timber grain, set on a deep black plaque with a slate texture and a fine gold keyline running inside the border. A small flourish crowns the arch, the tagline sits under a thin divider, and four standoff heads at the corners finish it like something bolted up in a bar that has been there a while.
It is digitally designed in the old tavern signwriting style, warm and worn rather than clean and modern. The carved timber look is in the artwork. The sign itself is aluminum or acrylic, and we would rather tell you that up front than have you unwrap it expecting oak.
Funny Bar Signs for a Man Cave, Basement Bar or Garage
This is a man cave sign, a basement bar sign and a garage bar sign, and it suits all three for the same reason: the humor is for the people who already know you. It hangs over a bar top, behind a kegerator, at the bottom of the basement stairs, in a games room, or beside the door of a garage someone calls a workshop.
It is a gift that lands, and the two custom lines are what make it one. If you are buying for someone whose home bar already has a name, or who has been calling the basement a speakeasy for two years, put that name on the header and the running joke underneath. The horizontal shape sits well on the wall above bottles, where a tall sign would fight the shelving.
Aluminum or Acrylic, and What That Changes
Aluminum is the one to pick if the sign goes anywhere weather reaches, a covered patio, an outdoor bar, a pole barn or a garage that gets cold. It is 3mm aluminum composite, rigid, and it does not care about damp.
Acrylic is the one to pick if you want it lit. The edge is clear and engineered to accept an LED strip, so the whole sign glows from the perimeter the way the photographs show. It is high gloss, so the timber grain and the gold keyline pick up bar lighting even unlit, and it comes with standoff hardware for a floating mount. Acrylic is indoors only.
LED strip kits are not included. We wrote a free step by step guide for fitting them: how to add LED backlighting to your acrylic or metal sign.
What Arrives
✔ Your name set in the arched header
✔ Your own line underneath, or leave it and keep EVERYONE NEEDS A GOOD ONE
✔ Your choice of 3mm aluminum composite or high gloss acrylic
✔ Eleven sizes, from 16 by 8 inches up to 90 by 45 inches
✔ Acrylic has a clear edge built to take an LED strip, and arrives with standoff hardware for a floating mount
✔ Aluminum is rigid, weather tolerant and rated for a covered outdoor bar or a patio
✔ Printed with fade resistant UV inks
✔ Ready to hang
✔ Designed in Michigan, made to order in North America
✔ Free shipping to the USA and Canada
Questions About This Personalized Bar Sign
What can I personalize?
Two lines. The name in the arched header above ALIBI, and the saying underneath. Type the name exactly the way you want it printed, apostrophe included. Leave the second line blank and it stays as EVERYONE NEEDS A GOOD ONE. TODD'S in the photographs is our example, not a fixed part of the design.
How long can the name be?
Up to 45 characters on each line, though short reads best. A single name or a two word bar name sits comfortably in the arch and gets set large. Something long is condensed to fit, which still looks right but gives up a little of the presence.
Is this real wood?
No. The lettering is designed to look like carved timber, and it is printed. The sign is 3mm aluminum composite or high gloss acrylic, your choice. We do not make wood signs, and we would rather be straight about it than have it turn up and surprise you.
Is the lettering actually raised?
No. Our signs are made of aluminum. There is no embossing, raised lettering, or engraved lettering on our signs. They are graphically printed to look as if they have those effects. The bevel and the shadow on the letters are in the artwork, and they read as carved on the wall from a few feet back, which is where anyone looks at it from.
Does it light up like the photos?
The acrylic can. Its edge is clear and built to take an LED strip, and that is what produces the glow around the plaque. The strip is not included, and our free guide walks through fitting one. The aluminum does not backlight. It is a solid panel, so light cannot pass through it.
Is this a neon sign?
No, and we do not make neon. This is a printed sign. The acrylic version lights from an LED strip along its edge, which gives a soft even glow rather than the bright tube look of neon. If neon is what you are after, we are the wrong shop and we would rather say so.
Should I choose aluminum or acrylic?
Pick aluminum if it goes outside under cover, in a garage, a pole barn or anywhere that gets cold or damp. Pick acrylic if it hangs indoors over a bar and you want it lit or you want the high gloss. If you are torn and it is going in a finished basement bar, acrylic is the one people are happier with.
What size should I order?
Measure the wall it hangs on and aim for roughly two thirds of that width in sign. Over a standard home bar back wall the 36 by 18 or the 42 by 21 is usually the right call. Cut the size out of painters tape and stick it up first. It costs nothing and it settles the argument.
Can it go outside?
The aluminum can, under cover. A porch, a covered patio bar, a pole barn or a garage are all fine. The acrylic is an indoor material. For a fully exposed wall we would still put the aluminum under an overhang rather than in open weather.
How is it hung?
Acrylic comes with standoff hardware for a floating mount that stands the sign off the wall a little, which is also what leaves room for an LED strip. Aluminum is ready to hang.
NOTE: Measure your space carefully with a tape measure. We are not responsible for the wrong size ordered. Use our size guide here.
*Our design features a flat image, without any beveling, embossing, engraving, or raised letters
Material
---------METAL-----------
(Made for outdoors and indoors)
3mm (1/8 inch) aluminum composite
Two thin aluminum cover layers bonded to a solid core. Lightweight,
rigid and weather resistant, which is why it holds up on a barn, a
gate, a fence line or a storefront.
Built to last. Will not rot, warp, crack or rust.
UV resistant ink. No fading or peeling.
4 to 6 metal stand-offs included for mounting, 8 on the largest signs.
Our signs are made of aluminum. There is no embossing, raised
lettering, or engraved lettering on our signs. They are graphically
printed to look as if they have those effects.
.
.
-------------CANVAS-------------
(Not made for outdoors)
Our signs may look like old wood or rusted metal. They are canvas.
410 g/m2 premium artist canvas, semi-gloss print.
1.5 inch thick wooden gallery frame with beveled stretch bars.
Ready to hang. Mounting wire comes attached.
Felt pads included for wall protection.
All canvas prints are wrapped and shipped in fitted packaging.
.
.
---------ACRYLIC ---------
(Not made for outdoors)
1/8 inch thick digital grade acrylic
Back floating mount, or stand-offs on request
The deepest color and the highest gloss of the three.
.
.
-------FINE ART PAPER--------
(Not made for outdoors)
Our premium archival matte paper is a smooth, neutral-white matte
paper for high-quality fine art, photo reproduction and open-edition
decor. It supports accurate color reproduction and high-contrast,
high-resolution output, and is acid-free for a longer print life with
pigment inks. Heavy weight at 230 gsm, thick 9.5 mil base, with an
instant-dry coating that resists fingerprints and smudging.
.
.
--------MADE TO ORDER--------
Digitally designed and printed for you after you place the order.
Designed in Michigan, made to order in North America.
Shipping Details
All our products are made to order just for you.
Personalized orders receive a proof to approve before anything goes
into production.
Your tracking number is added to your order as soon as we have it.
Questions about timing for a specific order? Call us on 616.897.2070,
Monday to Friday, 8 to 5 Eastern, and we will give you a straight
answer for your sign.
Care Instructions
Gently clean your artwork with a soft, damp cloth.
Avoid using household chemical cleaners, as they can damage the artwork.
Do not expose canvas prints & acrylic prints to direct sunlight.
Sustainablity
Print One. Plant One is our Motto at our State of the Art Print Facility in Canada.
Planting one tree for each print
With the help from our friends at Trees for the Future, our donations will plant trees with rural communities in the developing world, enabling them to rest their environment, grow more food, and build a more sustainable future.
Our Print Partner supports Trees for the Future, a 501(c)3 non -profit organization, recognized by 1% for the Planted, that operates an agroforestry program to restore trees to degraded lands by working with smallholder farmers.
All our products are made to order. We carry no stocked items which reduces cost and excess inventory.
Mounting
Stand-Off Sizes/Measurements - 19mm diameter x 25mm long
OR
Built-in Back Floating Frame ¾-inch
Canvas
Lightweight and premium grade 1.5" thick wood (gallery)
Wire - Ready to hang
Felt pads for wall protection
410g/m2 Premium artist canvas, producing incredible printing sharpness
Fine Art Print
Custom Made in North America. We proudly make each frame by hand and guarantee a perfect piece. Our frames come ready to hang right out of the box. Pictorem Guarantee the frame to arrive in perfect condition and free of any defect.












